Bestway Lay-Z-Spa 2008 Model

• Tell a Friend

This is the new 2008 model Lazy spa.

Why pay thousands of pounds for a spa.

New groundbreaking technology brings an affordable hot tub that sets up in minutes, with no tools required. The lay-z-spa can comfortably accomodate 4 adults and features a digital control panel with LED display on the pump.

Enjoy 40°C (104°F) water temperature and 80 massage jets.

Our Lay-Z-Spa Inflatable Hot Tub package includes

• 1 x Lay-z-spa inflatable hot tub
• 1 x inflatable hot tub cover
• 1 x filter pump
• 1 x filter
• 1 x inflation hose
• 1 x chemical floater (tablets not included)
• 1 x instruction manual
• 1 x hot tub repair patch

Specification

• Capacity - 4 Adults
• Set up in 10 minutes
• Gallons - 240 gal (900L) 
• Outer Diameter - 205cm  
• Inner diameter - 145cm  
• Height - 79cm
• Temperature Control - Adjustable to 40 C max
• Filtration System - 500gal/h
• Cover - Locking soft cover (6 safety locks) 
• Turbo Massage Air Jets - 80 Individual Micro-Air Jets  
• 220-240V ~ 50Hz, 2,050W
• Rapid Heating System - Approx 1.5 0- 2c per hour
• Comfort Construction - Air Filled Bottom Cushion with PVC Grey Interior 
• 2000watts heater
• 50w filter pump
• 4.5m cable length

The Lay-Z-Spa inflatable hot tub can be used both indoors and outdoors. Here are some points that you should consider when deciding where to locate your hot tub

Indoor Hot Tub Use

• Make sure that the floor can withstand the full weight of the hot tub when full.
• The Lay-z-spa should be used on a level, non slip surface
• Proper drainage is recommended. Whilst the hot tub does allow for a hose to be attached to drain the water we do also recommend having a floor drain installed
• Humidity is a natural side effect of using the Lay-z-spa hot tub. Consider the effects that mositure in the air may have on any decor in the room that you are using the Laz-z-spa

Outdoor Hot Tub Use

• Make sure that the spa is placed on a flat and level surface
• Make sure that there are no sharp objects around that could puncture the hot tub
• Preferably situate the hot tub near to a drain

Construction of the Lay-z-spa inflatable hot tub

Construction of the Lay-Z-Spa couldn't be simpler. Simply inflate the hot tub using the pump that is included, attach the filter pump fill with water and turn on. Now all you have to do is wait until the water is warm and it is ready to use.

Construction should take approximately 10 minutes

Warranty

Our Lay Z spa package comes complete with a 12 month manufacturers warranty on the filter pump and 3 month manufacturers warranty on the lining

FAQs

How often should the filters be changed?

We recommend changing the filters every 2 - 3 weeks. However the filters can also be cleaned prolonging their life for upto a month.

How should I clean my Lay-Z-Spa?

To clean the Lay-Z-Spa fully first drain the water by attaching a hose to the draining valve. Once empty use warm soapy water and a soft damp sponge.

How can I store my Lay-Z-Spa?

One of the great advantages of the Lay-Z-Spa is that it can be easily packed away and stored when not in use or for transportation. To store you should first drain the Lay-Z-Spa and clean both inside and out. Once the spa has been cleaned simply deflate and store away in a box until next use.

How often should I change the water in my Lay-Z-Spa?

We recommend changing the water approximately every 3 - 4 weeks

Is it ok to sit on the side of my Lay-Z-Spa?

Yes the reinforced walls of the Lay-Z-Spa can withstand people sitting on the side of the spa.

Do I need to use chemicals with the Lay-Z-Spa?

You can use the spa without chemicals, however you may have to change the water more often.

Why does the heater turn off when I turn on the jets?

On all new spas Bestway has introduced a new safety feature. When the air jets are turned on the heater will turn off, meaning that the jets and heat cannot run at the same time. This is also designed to prolong the life of the filter pump. Whilst the jets are on the water will lose between 1 and 2 degrees in temperature per hour.